Details: Logic Status Indicator Module


The Logic Status Indicator Module is an invaluable tool for troubleshooting your projects or jazzing them up with lights.  Nobody should be without one.

The Logic Status Indicator Module may be used in a number of ways and is designed for aiding the designer or programmer with diagnostic data about the hardware or software that is in their current project.

The Logic Status Indicator Module may also be used as direct reading display for binary number that are present on any of the four ports on the OOPic or the 16 bit I/O port for the 24 pin processors.

The Logic Status Indicator Module may also be a stand alone 32 bit parallel logic probe by using  a 34 pin wiring harness that has small Pin-Hooks on the ends of the 34 wires of the wiring harness.  Very simple connections, one wire for the 5-18 volts DC supply, and one wire for ground.  The rest will be the data inputs for testing.

We plan on many projects utilizing this board and you may see it in projects for our other products soon.

Please Note: The Logic Status Indicator Module is NOT compatible with the OOPic R processor.  All other OOPic's are compatible with this product.

This page last edited on January 12, 2004